 |
95% Efficiency Francis Water Turbine 400kw 55m Water Head
Product Details:
| Place of Origin: | Sichuan |
| Brand Name: | Wawushan |
| Certification: | ISO9000 |
| Model Number: | HLA-053 |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 |
|---|---|
| Price: | Negotiable |
| Packaging Details: | plywood |
| Delivery Time: | 120-150 work days |
| Payment Terms: | T/T |
| Supply Ability: | 1 set 4-5 month |
|
Detail Information |
|||
| Water Head: | 55 M | Water Flow: | 0.93 M³/s |
|---|---|---|---|
| Runner Material: | Stainless Steel | Efficiency: | 89%-95% |
| Capacity: | 400kw | Frequency: | 50HZ |
| Power Factor: | 0.8 | Rated Efficiency: | 94% |
| Excitation Mode: | Brushless | Color: | Red |
| High Light: | 400kw francis water turbine,francis water turbine 95% efficiency,55m Water Head vertical francis turbine |
||
Product Description
400kw francis hydro turbine efficiency 95% 50HZ
Francis turbine of Hongya Hydro Generator the water head range is 15m to 300m, capacity from 100kw to 6000kw for each single unit.
| No. | ||
| 1 | Water head | 55m |
| 2 | Water flow | 0.93m³/s |
| 3 | Capapcity | 400kw |
| 4 | Efficiency | 89%-95% |
| 5 | Frequency | 50Hz |
| 6 | Power factor | 0.8 |
| 7 | Rated efficiency | 94% |
| 8 | Excitation mode | Brushless |
| 9 | Color | Customized |
1. Spiral Casing
Spiral casing is the inlet medium of water to the turbine. The water flowing from the reservoir or dam is made to pass through this pipe with high pressure. The blades of the turbines are circularly placed, which mean the water striking the turbines blades should flow in the circular axis for efficient striking. So the spiral casing is used, but due to circular movement of the water, it looses its pressure.
To maintain the same pressure the diameter of the casing is gradually reduced, so as to maintain the pressure uniform, thus uniform momentum or velocity striking the runner blades.
2. Stay Vanes
Stay vanes and guide vanes guides the water to the runner blades. Stay vanes remain stationary at their position and reduces the swirling of water due to radial flow, as it enters the runner blades. Thus making turbine more efficient.
3. Guide Vanes
Guide vanes are not stationary, they change their angle as per the requirement to control the angle of striking of water to turbine blades to increase the efficiency. They also regulate the flow rate of water into the runner blades thus controlling the power output of a turbine according to the load on the turbine.
4. Runner Blades
The performance and efficiency of the turbine is dependent on the design of the runner blades. In a turbine, runner blades are divided into 2 parts. The lower half is made in the shape of small bucket so that it uses the impulse action of water to rotate the turbine.
The upper part of the blades use the reaction force of water flowing through it. These two forces together makes the runner to rotate.
5. Draft Tube
The pressure at the exit of the runner of Reaction Turbine is generally less than atmospheric pressure. The water at exit cannot be directly discharged to the tail race. A tube or pipe of gradually increasing area is used for discharging water from the exit of turbine to the tail race.
This tube of increasing area is called Draft Tube. One end of the tube is connected to the outlet of runner while the other end is sub-merged below the level of water in the tail-race.
Hongya Power Generating Equipment To Utilities Limited, is founded in May, 2003 as a professional manufacturer of mini hydraulic generator generator set.The total company land is about 70000 Square meters, construction part 35000 Square meters. The employee is about 200 workers, which the R&D part is 25%.
Till now, HPGE offer a comprehensive range of hydroelectric power plant solutions that cover the entire scope of service including: Small hydro power project consultant; Site management studies; equipment Design; Hydroelectric equipment Manufacture; Project management; Installation guidance; Commission and start operation; Operation guidance; Hydroelectric equipment maintenance.
Products of HPGE are widely used in all around China, we cooperate with more than 300 hydro power plants with more than 600 turbine generators sets , including Francis turbine generator set, turgo turbine generator set, pelton turbine generator set, Kaplan turbine generator set, areas covering more than 20 provinces of China and also international markets such as Russia, Belarus, Turkey, Albania,Vietnam Indonesia, Nepal, Laos, Sri Lanka, Cuba and Brazil etc.
FAQ
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation and so on
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4, Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.