"water turbine generator 50hz"

Pelton Turbine Water Head 550m Hydro Power Plant Samll HPP Machine house including house and cover. The house connects the main part in a whole. One of the bearings for deflector shaft is located on a truncated cone hole near the connection between the house and the distributor. Connect the cover and house by screws and put asbestos pad between them. Place of Origin: Sichuan, China Brand Name: Customized Warranty: 1 year Application: Hydropower Plant Certificate: ISO9001

Hydro Power Plant Kaplan 500kw 50hz On Gird They are used at Middle and Small Hydropower Plant or Hydropower Spot. The rated output from 50KW to 20MW is our advantage. Water Head 25m-300m Runner Diameters 0.45m-5m Power Range 100KW to 20MW Frequency 50HZ/60HZ Generator Voltage 400V, 800V, 6300V, 10500V Layout pattern Horizontal or Vertical Material(blades) Stainless Steel ZG0Cr13Ni4Mo Excitation Brushless or Static excitation system Generator Insulation F/F Lifespan 30~50

300kw Mini Hydroelectric Generator For Micro Hydro Power Plant overview Hydro-generating unit is the key power equipment in the hydropower plant. The hydro generator is a device that converts the rotating mechanical energy of a hydro-turbine into electrical energy through a main shaft connected to the hydro-turbine runner. two different mount for generator of vertical and horizontal which could be operated at brushless excitation and thyristor excitation. the hydro generator

1200kw Hydro Pelton Turbine for water head 120m 50HZ on gird 1. Nozzle and Flow Regulating Arrangement (Spear) Nozzle is used to increase the kinetic energy of the water that is going to strike the buckets or vanes attached to the runner. The quantity of water that strikes the buckets is controlled by spear. The spear is installed inside the nozzle and regulates the flow of water that is going to strike on the vanes of the runner. A nozzle containing spear is shown in the

Hydro Pelton Turbine 180m water head 50HZ 550kw 1. Nozzle and Flow Regulating Arrangement (Spear) Nozzle is used to increase the kinetic energy of the water that is going to strike the buckets or vanes attached to the runner. The quantity of water that strikes the buckets is controlled by spear. The spear is installed inside the nozzle and regulates the flow of water that is going to strike on the vanes of the runner. A nozzle containing spear is shown in the figure given

1500kwHydraulic Turbine for Hydro Power Plant Overview 1. Water inlet parts The water inlet components are composed of connecting pipes, water turbine inlet valves and expansion joints. The turbine inlet valve is used to shut down the unit in still water when shutdown is required, and is also used to shut down the unit and shut off the flow in dynamic water when the unit is in an emergency and the turbine distributor fails. Expansion joints are used to compensate installation

750RPM Micro Pelton Hydro Generator 600kw 100m Water Head 94% Efficiency Pelton Hydro Generator Overview The Pelton turbine is an impact hydraulic turbine designed for high-head, small-flow hydropower applications. Its working jet center line is tangent to the runner pitch circle, with runner blades composed of double bowl-shaped buckets. Available in horizontal and vertical shaft configurations, the runner always operates in atmospheric conditions. Runner and Buckets Design

Product Description: Vertical Hydro Turbine The Vertical Hydro Turbine is a highly efficient and reliable source of renewable energy, designed to harness the power of water flow in rivers, canals, and other water sources. With low maintenance requirements and a capacity of 2500 KW, this product is a cost-effective solution for clean and sustainable power generation. Product Overview The Vertical Hydro Turbine consists of a water turbine mounted on a vertical shaft, which is

Product Description: The Francis Hydro Turbine has an outlet flow rate of 1.8 M3/s, which means that it can handle a large volume of water flow. It is made of high-quality stainless steel material that ensures durability and long-lasting performance even in harsh environments. This material is resistant to corrosion and erosion, which makes it ideal for use in water turbines where water is constantly flowing. The inlet flow rate of the Francis Hydro Turbine is 2 M3/s, which